Diamondback Release 1

Category:

Description

Description

The Release starts with Diamondback’s new Level Link suspension platform providing an active, supple rear end to take in hits on descents at the same time as being an efficient climber as well.  It is a trail bike with a variety of talents with a focal point on fun.

Thanks to a geometry with short chainstays and a long top tube, the Release is a snappy, nimble and poppy bike at the same time as still being a steed that can wade through a rowdy descent thanks to 150mm suspension up front.

A 150mm Rockshox Yari RC fork, 1×11 SRAM drivetrain, 148mm thru-axle rear end, and SRAM Level hydraulic brakes round out the parts build.

The Diamondback Release 1 is an effective bike that you’ll rise up and mash all day at the same time as still feeling peppy.

Specs
Frame Release 27.5, 130mm Go back and forth, Level Link Suspension Platform, Hydroformed Tubing, ISCG-05 Tabs, Boost 148x12mm Maxle Drop Out, 1.5″ Tapered Headtube
Rear Shock RockShox Monarch R DebonAir, 200x57mm
Fork RockShox Yari RC, 150mm Go back and forth, w/ Rebound and Compression Damping, 35mm Stanchion, 1.5″ Alloy Taper Steerer, w/ 110x15mm Boost Thru-axle
Cranks SRAM NX 1x, w/ X-Sync 30T Chain Ring
Bottom Bracket SRAM GXP
Rear Derailleur SRAM NX X-Horizon, 11 Speed
Shifter SRAM NX 11 Speed X-Actuation Trigger
Cogset SRAM PG1130, 11 Speed, 11-42T
Chain KMC X11EL, 11 Speed
Front Hub 32h Alloy,110x15mm BoostThru-axle, Sealed Cartridge Bearing, w/ CNC Disc Mount
Rear Hub 32h Alloy, Boost 148x12mm Thru-axle, 4 Sealed Cartridge Bearing, Cassette
Spokes 14g Stainless Steel
Rims Diamondback Blanchard 28R, Tubeless Compatible, 32h
Tires Schwalbe Hans Dampf, Performance, 27.5×2.35″
Brakes SRAM Level Hydraulic Disc, w/ 180mm Front / 180mm Rear Centerline Rotors
Brake Levers SRAM Level Hydraulic Levers w/ Tooled Reach Adjust
Pedals DB4L Alloy Platform w/ Replaceable Pins
Handlebar DB35 Alloy, 780mm Wide, 15mm Rise, 35mm Bar Bore
Grips DB4L “Lock on” 135mm Kraton
Stem DB35 Alloy, 40mm Reach, 35mm Bar Bore
Seat WTB Volt Comp
Seatpost DB Alloy Micro Adjust, 31.6mm
Extras Owner’s Manual, Assembly Guide, DB Shock Pump, Tubless Valves, DB Torque Wrench w/ 3mm/ 4mm/ 5mm/ T25 Hex Bits, Diamondback Mud Guard, Extra Derailleur Hanger
Bike Weight 32.1 lbs
Accessories Release 27.5, 130mm Go back and forth, Level Link Suspension Platform, Hydroformed Tubing, ISCG-05 Tabs, Boost 148x12mm Maxle Drop Out, 1.5″ Tapered Headtube

 

Size Guide
Bike Size SM/15″ / Rider Height: 5’4″ – 5’7″ MD/17″ / Rider Height: 5’7″ – 5’10” LG/19″ / Rider Height: 5’10” – 6’2″ XL/21″ / Rider Height: 6’2″-6’6″
Seat Tube Length 394mm 432mm 483mm 533mm
Stand Over Height 739mm 740mm 743mm 749mm
Top Tube Length 585mm 610mm 635mm 660mm
Stack 584.4mm 593.6mm 602.7mm 611.8mm
Reach 406.3mm 428.5mm 450.7mm 473.3mm
Head Tube Length 100mm 110mm 120mm 130mm
Head Angle 66° 66° 66° 66°
Seat Angle 73° 73° 73° 73°
Wheel Base 1133mm 1160mm 1186mm 1213mm
Chain Stay Length 425mm 425mm 425mm 425mm
Fork Offset 44mm 44mm 44mm 44mm
BB Height 14mm 14mm 14mm 14mm
Stem Length 40mm 40mm 40mm 40mm
Handlebar Width 780mm 780mm 780mm 780mm
Crank Length 170mm 175mm 175mm 175mm
Seat Post Length 350mm 350mm 350mm 350mm

Reviews

There are no reviews yet.

Be the first to review “Diamondback Release 1”

Your email address will not be published. Required fields are marked *