Seamax Portable Boat Electric Air Pump (80D) – Warehouse Deal 20% Off

Category:

Description

Seamax 12V Electric Air Pump with Double Stages
Designed for Inflatable Boat, Raft, and Kite (Color – Blue or Yellow)


2 Years Limited Warranty – Only Available from Seamax Marine

Warehouse Deal for Open Box or Used – Like New.
Full Warranty, Free Shipping, 100% Satisfied Guarantee!

  • Main
    Features: LCD Display, Digital Keep an eye on & Digital Pressure Gauge, Dual Motors
    & Double Stages, Built in Turbo Fan & High Pressure Compressor; Input:
    DC12V / 40A / Max Power Dissipation: 500W. Max 500L Air per Minute & Max Working Pressure 60Kpa (8.5 PSI). Pressure Increments: Per 1Kpa / 0.15 PSI & Start from
    1 PSI. Pump Auto Stop. Maximum Continuous Working Time: 30 Minutes.
     
  • Enter the
    maximum desired pressure by the usage of the set pressure button. The pump provides
    readings in metric (KPa).
      (Pressure:
    10KPa = 100mbr = 1.45 PSI).
      Default
    working pressure is set at 25KPa (3.6 PSI) for heavy duty inflatable boat.
    45Kpa / 6 PSI for inflatable kite.
     
     
  • Press the POWER button to start. All over inflation, the left hand side of LCD screen shows
    the pressure that the inflator has reached. As soon as entered set pressure has
    been reached, the inflator turns off automatically.
      Take off the air hose from the chamber once
    the pump stops running. The inflator can be turned off manually at any time bypressing the POWER button.
     
  • The pump comes with Kite air valve adaptors in the package. The 2nd stage jumping point has small difference comparing with boat version. The Kite version pump is also good for Inflatable boats and it has all the features as the pump standard version.

  • Standard Version: for inflatable boats and kites up to 6 PSI / 50 Kpa. Reinforced Version: for 7 PSI / 50 Kpa or higher applications.
     

Pump Operation Detail Instruction

  1. Choose the proper fitting for the air valve of your inflatable boat, kite or paddle board. Put the valve at the inflation position. Attach the correct valve adapter to the inflation hose that comes with your pump. Attach the other end to the pump (smooth round outlet on the pump).

  2. Connect the pump’s terminals to the battery paying
    close attention to the polarity. Make sure the clips are on the same color electrode and properly connected. Differently the pump won’t turn on or run properly.  

  3. Enter the maximum desired pressure by the usage of the set pressure button. The set pressure will be shown on the right hand side of the LCD screen. The pump provides readings in metric (KPa).  (Pressure: 10KPa = 100mbr = 1.45 PSI).  Factory
    default working pressure is set at 25KPa (3.6 PSI).This pressure is suitable for most inflatable boats. 45Kpa is 6 PSI to fortify the inflatable kite.   

  4. Press the POWER button to start. All over inflation, the left hand side of LCD screen should show the pressure that the inflator has reached. As soon as entered set pressure has been reached, the inflator
    turns off automatically.  Take off the air hose from the chamber once the pump stops running. The inflator can be turned off at any time by pressing the POWER button again. It is imaginable to stop the inflator at any time by pressing this button.

  5. The inflator operates in two stages which can be identified by the noise of the turbine at the beginning followed by the piston. The inflator switches from turbine
    to piston automatically.  If the chamber pressure is over 7KPa / 1 PSI, the pump will start the 2nd stage only. If the set pressure is lower than the chamber’s pressure, the pump won’t be started.

Additional Information

  1. This pump is suitable for the products that are the usage of the HR (Halkey-Roberts), Bravo or similar type air valve, Leafield valve etc. This type of air valve has a turning pin at the middle to Keep an eye on the valve’s Open & Closed position. There are universal valve adapters supplied with the pump to fit it. We have the Pump in Kite version, Please know the Kite version pump also good for Inflatable boats and all application same as the
    regular pump version.

  2. The inflator operates in two stages
    which can be identified by the noise of the turbine at the beginning followed by the piston. The inflator switches from turbine to piston automatically. If the chamber pressure is over 7KPa / 1 PSI, the pump will start the 2nd stage only. If the set pressure is lower than the chamber’s pressure, the pump won’t turn on.

  3. Use for Deflation – You’ll be able to use it to deflate the same chamber too. Attach the yellow hose
    onto the deflation side of the inflator (round outlet with notches). Attach the other
    end to the chamber you wish to deflate.

  4. Warranty – For recreational the usage of, the electrical Keep an eye on boards, motor, charger are guaranteed for 2 years. Air hose, valve adapters and carrying bag are guaranteed for 6 months. Warranty for commercial use is limited to six months from purchase date.


Terms of Warehouse Deal Item

1). The sale is only for USA & Canada customer located at lower 48 states and with free ground shipping service. Additional shipping cost $35 will be applied if shipping to Alaska, Hawaii, Puerto Rico, Virgin Island in USA , and Remote Area of Canada.

2). We can 100% guarantee You’ll be able to receive a good condition item, Differently a free replacement shipping will be issued if buyer report product deflects with picture in 30 days of item received.

3). Please allow 15-25 days for shipment handling and transit. We do not provide expedited shipping service with this purchase.  Item may be shipped from USA. The sale is final and no Free Return Policy aside from product defects.


Thanks for visiting Seamax eBay Store
!

 

Reviews

There are no reviews yet.

Be the first to review “Seamax Portable Boat Electric Air Pump (80D) – Warehouse Deal 20% Off”

Your email address will not be published. Required fields are marked *